| Three-shaft Thread Rolling Machine |
| Model |
ZC28-6.3 |
| This is a thread producing machine which uses its three thread rolling dies, mounted in the same separation |
| angle of 120°,to realize roll forming of the work piece, for metal has the performance of plastic |
| deformation under the pressure operation. |
| It is not only used for roll forming of normal thread work piece, but also applied to thin-walled thread |
| work and special-shaped work. |
| Generally speaking, material for roll forming should be carbon steel, alloy steel or some non-ferrous metal, |
| with elongation>10%,tensile strength<1000MPa,and hardness |
| maximum rolling pressure |
63KN |
| diameter of main shaft |
45mm |
| maximum width of rolling die |
60mm |
| minimum center distance |
43mm |
| feeding speed |
0.1~4mm/s |
| speed of mineshaft |
44\66\92\137r/min |
| gross power |
8kw |
| maximum inclination of main shaft |
±6° |
| maximum diameter of rolling die |
155mm |
| maximum center distance |
95mm |
| Max. rolling dia. |
120mm |
| maximum diameter range |
14-42mm |
| maximum thread pitch |
3mm |
| net weight approximate |
7000kg |
| overall size |
2100 x 2200 x 2300mm |
